How to Install a Brita Purity C Stand for Your Coffee Machine

Quick answer

To install a Brita Purity C Stand for your coffee machine, mount the stand securely on a flat surface, attach the filter head, and connect the water line. This guide walks you through each step with common pitfalls to watch for.

Step-by-step installation guide

1. 1. Position the stand: Place the Brita Purity C Stand on a level, sturdy surface near your coffee machine. Ensure there is enough clearance above for the filter cartridge and filter head. Common mistake: placing the stand on an uneven surface can cause the filter to wobble and leak. Use a spirit level if needed.
2. 2. Attach the filter head: Screw the Brita Purity C Filterkopf onto the top of the stand. Hand-tighten only; over-tightening can damage the threads. Check that the filter head's G 3/8 connection is oriented toward your water supply line for a straight hose run.
3. 3. Insert the filter cartridge: Slide a compatible Brita Purity filter cartridge (C50, C150, or C300) into the stand from below, then push it up into the filter head until it clicks into place. Common mistake: not fully engaging the cartridge can cause water to bypass the filter. Listen for the click and give a gentle tug to confirm.
4. 4. Connect the water supply: Attach your coffee machine's water inlet hose to the filter head's G 3/8 outlet. Use a wrench to snug the connection, but do not overtighten. Use Teflon tape on the threads to prevent leaks. A common error is skipping the tape and then finding a slow drip later.
5. 5. Flush and vent the system: Open the water supply valve and use the integrated flushing valve on the filter head to bleed air from the system. Let water run for 2–3 minutes until it flows steadily without sputtering. Skipping the venting step can cause air locks, leading to erratic water flow and poor coffee extraction. Always vent before first use.
6. 6. Test for leaks and finalize: Check all connections for drips. Run a short brew cycle on your coffee machine and inspect again. If no leaks are found, your installation is complete. After 24 hours, re-check connections—temperature changes can cause fittings to loosen slightly.

Product facts

• Brita Purity C Standfuß für Wasserfilter (1 Stück): The Brita Purity C Stand provides stable support for filter cartridges in sizes C50, C150, and C300. A stable stand prevents the filter cartridge from tipping, ensuring consistent water flow and reducing the risk of leaks.

  

• Brita Purity C CU 0-70% Filterkopf für Wasserfilter: The Brita Purity C 0-70% Filterkopf features a user-friendly G 3/8 connection with an integrated flushing valve for easy venting. The integrated flushing valve simplifies the initial air-bleeding process, saving time and preventing air locks in the water line.