Back to Blog
How-to Guides 2026-11-21 House of Coffee 0 views

How to Install a Flexschlauch for Your Espresso Machine

How to Install a Flexschlauch for Your Espresso Machine

Learn how to install a 3/8 inch braided flexschlauch to plumb in your espresso machine with a BWT Besthead filter system. Step-by-step guide for home baristas.

What This Flexschlauch Is For

The Flexschlauch - 3/8" Sanitär Anschluss-Schlauch is a stainless steel braided water connection hose designed specifically to connect a BWT Besthead filter head to a portafilter espresso machine. If you are plumbing in a machine for a direct water line, this hose bridges the filter system and the machine inlet.

It comes with 3/8" female threaded connectors made from nickel-plated brass and includes a ball seal (Kugelkopfdichtung) for a leak-free fit. Two lengths are available: 30 cm and 150 cm, so you can choose the one that fits your counter layout.

Installation Steps

  1. 1. Confirm compatibility: Check that your espresso machine has a 3/8" female water inlet thread and that you have a BWT Besthead filter head. This hose is purpose-made for that filter head connection.
  2. 2. Choose the right length: Measure the distance from the filter head outlet to the machine inlet. Select the 30 cm variant for short, tidy runs or the 150 cm variant if the filter is mounted farther away.
  3. 3. Prepare the connections: Ensure both the filter head outlet and machine inlet threads are clean and free of debris. The hose connectors have a pre-installed ball seal; inspect it for damage before fitting.
  4. 4. Attach the hose to the filter head: Screw the 3/8" female connector onto the BWT Besthead filter head outlet. Hand-tighten firmly, then give a slight extra turn with a wrench — avoid overtightening to prevent damaging the seal.
  5. 5. Connect to the espresso machine: Attach the other end of the flexschlauch to the machine's water inlet. Again, hand-tighten plus a quarter turn is usually sufficient.
  6. 6. Test for leaks: Turn on the water supply slowly. Check both connections for drips. If a leak appears, tighten gently. Run a brew cycle to purge air from the line.

Product Details at a Glance

  • Flexschlauch - 3/8" Sanitär Anschluss-Schlauch: 3/8" Sanitär Flexschlauch with stainless steel braiding, 3/8" female threaded nickel-plated brass connectors, and ball seal (Kugelkopfdichtung). Designed for BWT Besthead filter head connection. The braided stainless steel jacket protects the hose from kinking and abrasion in tight spaces behind a machine. The ball seal provides reliable sealing without extra thread tape.
    Flexschlauch - 3/8" Sanitär Anschluss-Schlauch
    Flexschlauch - 3/8" Sanitär Anschluss-Schlauch

Length Selection Advice

The hose is available in 30 cm and 150 cm lengths. A 30 cm hose keeps the connection compact and reduces visible tubing — ideal if the filter head is mounted directly behind or beside the machine. The 150 cm option gives you flexibility to place the filter system on a shelf or under the counter, at the cost of some extra hose to tuck away.

Measure your actual path before ordering. Account for the space behind the machine where the hose will route, and allow a little slack so the connection is not under tension.

What the Supplied Information Does Not Cover

This guide covers the hose connection only. The supplied product information does not include instructions for mounting the BWT Besthead filter head, turning on the water supply, or flushing the filter system. Refer to your filter head manual for those steps.

The hose is rated for drinking water (Trinkwasser geeignet), but the product evidence does not specify maximum temperature or pressure ratings. For use with hot water lines or high-pressure systems, consult your machine and filter head documentation.

Related Articles

Customer Service
Home
Products
Cart
Profile