ブログに戻る
ハウツーガイド 2026-11-17 House of Coffee 0 ビュー

Bezzera SOLE Top PID: Dialing In Your First Espresso Shots

Bezzera SOLE Top PID: Dialing In Your First Espresso Shots

A practical guide to dialing in the Bezzera SOLE Top PID: use the adjustable PID, shot timer and dual water supply to tune grind, dose and temperature for your first shots.

Start with the machine's own controls

The Bezzera SOLE Top PID gives you two levers for dialing in: an adjustable PID brew temperature and a shot timer. Before you chase grind and dose, set a baseline temperature and watch the shot timer on every pull. The machine also has a dual water supply system—you can plumb it to mains water or use the internal 4-liter tank—so confirm which source you are using before your first session.

This guide focuses on the settings and workflow the catalog supports. It does not prescribe specific temperatures, grind sizes, doses or shot times, because those depend on your coffee, basket and taste. Use the machine's controls to make repeatable changes, then adjust one variable at a time.

What the SOLE Top PID gives you for dialing in

  • Bezzera SOLE Top PID Siebträgermaschine: Adjustable PID brew temperature and shot timer. These are your two primary feedback tools: set a repeatable brew temperature and use the shot timer to track extraction consistency.
    Bezzera SOLE Top PID Siebträgermaschine
    Bezzera SOLE Top PID Siebträgermaschine
  • Bezzera SOLE Top PID Siebträgermaschine: Dual water supply: 3/4" mains connection or removable 4-liter internal tank. Choose your water source before dialing in; switching sources can change temperature stability and workflow, so keep it consistent during tuning.
  • Bezzera SOLE Top PID Siebträgermaschine: Rotary pump with quiet pressure build-up and a 16-bar pressure gauge. The pressure gauge lets you monitor pump pressure during a shot, a useful checkpoint when grind or dose changes affect resistance.
  • Bezzera SOLE Top PID Siebträgermaschine: Two-portafilter setup with 8 g and 16 g baskets, plus blind basket, tamper, cleaning brush, scoop and water connection kit. You can start with the basket that matches your dose and use the blind basket for backflushing, without buying extras first.

A repeatable first-shot routine

Use this sequence to establish a baseline. The goal is consistency, not perfection on the first pull.

  1. Confirm your water source: Decide whether you are running from the internal 4-liter tank or a 3/4" mains connection. Keep that source constant while you dial in.
  2. Set a starting brew temperature on the PID: Choose a temperature and note it. The catalog confirms the PID is adjustable but does not supply a recommended starting value, so pick one and keep it fixed while you adjust grind and dose.
  3. Choose your basket and dose: The machine includes 8 g and 16 g baskets. Start with the basket that suits your intended dose, and keep that dose constant for several shots.
  4. Prepare the puck consistently: Use the included Bezzera metal tamper and scoop. Keep your distribution and tamp pressure as repeatable as you can; changing technique mid-dial-in adds noise.
  5. Pull a shot and watch the shot timer: Start the shot and note the time on the built-in shot timer. Also glance at the pump pressure gauge. Record time and pressure for each attempt.
  6. Adjust one variable at a time: If the shot runs very fast or very slow, change grind first. If you want to explore temperature, change only the PID setting and keep grind and dose fixed. Repeat and compare.

Using the PID and shot timer as feedback

The adjustable PID lets you set brew temperature, but the catalog does not specify a range or recommended values. Treat it as a repeatable control: pick a setting, pull several shots, then change it only when you want to isolate temperature as a variable. The shot timer gives you a consistent reference for how long each extraction takes, which is more useful than guessing.

The 16-bar pressure gauge and pump pressure manometer let you observe pressure behavior during a shot. If pressure looks unusual, check grind and dose before assuming a machine fault. The rotary pump is described as quiet with even pressure build-up, so sudden noise or pressure swings are worth noting alongside your grind changes.

Tank vs mains: what changes for dialing in

The SOLE Top PID can run from its internal 4-liter tank or a 3/4" mains connection. Both are supported, but they affect your routine differently.

  • Internal 4-liter tank: No plumbing required, and the tank is removable for refilling. Keep the tank filled consistently; running low can interrupt a dial-in session.
  • 3/4" mains connection: Provides a continuous water supply, so you are less likely to pause for refills. The included water connection kit and flex hose support this setup. Confirm your installation meets local plumbing requirements.

What the catalog does not settle

The supplied information does not include recommended brew temperatures, grind settings, dose weights beyond the basket sizes, or target shot times. It also does not provide a cleaning or descaling schedule. For those specifics, consult Bezzera's documentation or a qualified technician. Use the machine's PID, shot timer and pressure gauge to build your own repeatable baseline, and change one variable at a time as you refine your first shots.

関連記事

Customer Service
ホーム
商品
カート
マイページ